1. CAUSTIC SODA LYE
The Company manufactures Caustic Soda by using Membrane Cell Technology. The membrane cell operation utilizes Nickel as the Cathode and activated Titanium as Anode separated by high performance membrane for the electrolytic reaction. When electric current is applied to the electrolyzer, electrolyte (brine solution) gets converted into sodium & chlorine ions. Sodium ions gets transferred towards cathode compartment through membrances and gets converted into NAOH product after reacting with OH ions, theirby releasing hydrogen gas also. Chlorine ions in anodic compartment comes out with depleted brine solution where it is separated and sent to chlorine treatment sections for further treatment .
| Chemical Identity
|
||||||||
| Toxicity
|
||||||||
Caustic Soda is used in Field of Application:
|
||||||||
| Packaging
Safety/Precautions: Keep away from water. Use Plastic face shield, PVC gloves, PVC aprons, Gum boot, safety goggles and dust masks. Provide good ventilation at the place of handling. Avoid eating or drinking during work. In case of any spillage or leak on body, wash with sufficient water. Use spray water to cool containers involved in a fire to prevent rupture. For more information on manufacturing process of Caustic Soda |
||||||||
| 2. LIQUID CHLORINE
The Chlorine gas generated in the primary cell is about 80 C, which is passed through the cooler to make its temperature reduced to 16-17 C and passed through Absorption Drying Tower to make it Dry. Drying Media is Sulphuric Acid and is then compressed in Chlorine compressors and passed through Chlorine liquefier to convert Chlorine to liquid form. Chlorine has diversified uses in the synthesis of inorganic and organic chemicals, in many of which it does not appear in the end product but enters into the intermediate steps. It is mainly used in solvents, automotive antifreeze and antiknock compounds, pesticides, plastic, resins, and elastomers, refrigeration fluids propellants, inorganic compounds and metallurgical uses, organic intermediate, pulp and paper, water supply and sewage treatment, etc. | ||||||||
| Packaging
|
||||||||
| Chemical Identity
|
||||||||
| Toxicity
Precautions: Storage- Store 100Kgs cylinder and ton containers in cool, dry, well ventilated & relatively isolated area, protected from direct sun light and extreme temperature changes. Store cylinder upright and secure them so that they do not fall down. Keep enough space between two containers so that all are accessible in case of emergency. Transportation Do not allow over loading of the containers. Don't carry any other good/luggage/fire hazardous substances in the trucks. Carry a gas mask within the vehicles. Carry the literature of chlorine handling in the vehicle. Never park the vehicle under direct sun light. Cover the containers with tarpaulin etc. For more information on manufacturing process of Liquid Chlorine |
||||||||
| 3. HYDROCHLORIC ACID About 75% of Chlorine Gas is sent to the refrigeration section to convert Chlorine Gas to liquid form and rest 25% to Chlorine and sniff Chlorine Gas is burnt in presence of Hydrogen Gas in Hydrochloric Synthesis unit. As a result Hydrochloric Acid Gas is produced which is absorbed with water to make 33% Hydrochloric Acid.The largest users of hydrochloric acid are the petroleum, chemical, food, and metal industries. |
||||||||
| Chemical Identity
|
||||||||
| Specification
|
||||||||
| Packaging
|
||||||||
Toxicity
Safety/Precautions : Do no inhale the vapours. Do not touch with bare hands. Use safety goggles,hand gloves.Use with adequate ventilation. First Aid Measures : Inhalation : Remove to a fresh area. Give water or water and milk of magnesia to drink. Do not vomit. Call a physician. Disposal: Cover small spill with mixure of Soda-Ash, Slaked lime,Flush large spill with water to holding area and neutralize them. Applications:Steel Industry for Pickling, Ossein/gelatine, Demineralisation plant, Pharmaceutical. For more information on manufacturing process of Hydrochloric Acid |
||||||||
20th October, 2010:A meeting of the Board of Directors of the Company will be held on 3rd November,2010 to take on record the Unaudited Financial Results of the Company for the quarter ended 30th September,2010
29th May 2010 : The Board of Direcors of the Company in its meeting held this day have cosidered and apporoved the Annual Accounts of the Company for the year ended 31st March, 2010 and decided not to recommend any further dividend after enhancement of the Company's Share Capital and treat the interim dividend paid enhancement of the Company's Share Capital and treat the interim dividen paid on 53,32,083 Equity Shares of Rs.10/- each on 9th November, 2009 as the final dividend.
The Board has also taken on record the Audited Financial Results of the Company for the Quarter and the Year ended 31st March, 2010.
The Annual General Meeting of the Company will be held on Saturday, the 14th August, 2010 at 3 P.M. and the Register of Members and Share Transfer Books of the Company will remain closed from 7th August, 2010 to 14th August, 2010, both days inclusive, for the purpose of the Annual General Meeting of the Company to be held on 14th August, 2010.
17th May 2010 : A meeting of the Board of Directors of the Company will be held on 29th May, 2010 to consider the Accounts of the Company for the year ended 31st March, 2010 and to take on record the Audited Financial Results for the year ended 31st March, 2010.
16 April 2010 : The Company will publish audited results for the year ended 31st March, 2010 within 30th May, 2010. As such, the unaudited financial results for the quarter ended 31st March 2010 will not be published.
For more news click here